Why choose Chalco Aluminum supplier?
As we all know, oil tank trucks are dangerous goods on the road, and the requirements for safety are very strict. In order to ensure that our products meet the safety requirements of the tank truck industry, we have passed the certification of the EN14286 standard (European standard for the safety of liquid transport tank trucks) and the ASTM B209 standard (the American aluminum plate industry standard).
Chalco cooperates with many well-known tank car manufacturers, including CIMC Lingyu, pt.geluran adikarya, almutlak, etc.
Chalco has a complete set of advanced material research and development, testing, and analysis instruments, which can provide high-quality aluminum plates that meet safety standards for the tank truck industry to ensure safety and reliability during transportation.
Specifications of 3003 aluminum tread checkered plate for oil tanker
| Alloy | Temper | Pattern Type | Bottom Thickness | Muscle high | Width | Length |
| 3003 | H194 | Lentil shape | 2.0-4.0mm | 1mm | 1000-1600mm | 2000-10000mm |
| H194 | 5 Bar | 1.5-4.5mm | 1mm | |||
| O, H114 | ||||||
| H194 | 3 Bar-1 | 1.5-4.5mm | 1mm | |||
| H114, H194 | 3 Bar-2 | 1.0-4.5mm | 0.3mm | |||
| H114, H234, H194 | Crescent Pattern | 1.0-4.0mm | 0.7mm |
Chemical composition of 3003 aluminum tread checkered plate for oil tanker
| Element | Composition % |
| Si | 0.20 |
| Fe | 0.35 |
| Cu | 0.15 |
| Mn | 0.20-0.50 |
| Mg | 4.0-5.0 |
| Cr | 0.10 |
| Ni | - |
| Zn | 0.25 |
| Ti | 0.10 |
| Al | Remainder |
Mechanical properties of 3003 aluminum tread checkered plate for oil tanker
| Temper | Tensile Strength /MPa | Specified non-proportional Tensile Strength/MPa | Elongation After Break/% | Bending Factor |
| H114, H234 | ≥120 | - | ≥4 | ≥4 |
| H194 | ≥140 | - | ≥3 | ≥8 |
Features of 3003 aluminum tread checkered plate for oil tanker
Equivalent names for 3003 Aluminum tread checkered plate are Aluminum diamond plate, Aluminum tread plate or aluminium floor plate, aluminum anti-slip plate and Aluminum checkered plate.
Good corrosion resistance: 3003 aluminum Tread Plate has good corrosion resistance, can resist the erosion of most common chemical substances, and is suitable for use under various environmental conditions.
Strong wear resistance: 3003 aluminum Tread Plate has good wear resistance, can resist a certain degree of wear and scratches, and maintain a long service life.
Lightweight: compared with steel, aluminum alloy has a lower density, which reduces the overall weight of the tanker without sacrificing strength.
Good processability: 3003 aluminum Checkered Plate is easy to cut, bend, punch, etc., and can meet the needs of various shapes and sizes. It can also be connected by welding and riveting.
Good decoration: 3003 aluminum Checkered Plate has been processed by pattern, and the surface has unique texture and decorative effect, which can be used to improve the appearance of the product.
Application of Chalco 3003 aluminum tread checkered plate for oil tanker
3003 aluminum checker plates are usually used for the top walkway and door steps of tank trucks. The aluminum alloy checkered plate has good anti-slip performance and decorative effect, and is suitable for places where walking is required. They provide a safe non-slip surface for operators to walk on in wet or slippery environments. In addition, the aluminum checker plate also has a lower weight, which helps to reduce the overall weight of the tanker.
Precautions for purchasing 3003 aluminum tread checkered plate
Material and specification
Determine the required aluminum alloy material and specifications, including alloy type, thickness, width and length, etc. Different applications require different specifications of aluminum checkered plates, so make sure to choose the specifications that match your needs.
Pattern type
Chalco Aluminum Tread Checkered Plate has a variety of patterns to choose from, such as Compass Pattern aluminum plate, 1 Bar , 2 Bar , 3 Bar, 5 Bar Aluminium Tread Checkered Plate, lentil shape, Diamond shape, round bean shape anti-slip plate, etc. You can choose a suitable pattern type according to actual needs.
Surface treatment
The aluminum Tread Checkered sheet produced by Chalco can provide different surface treatments, such as anodizing, spraying, coating, etc. Appropriate surface treatment can be selected according to application requirements and aesthetic requirements.
Quality certification and supplier reputation
When purchasing aluminum checkered plates, make sure to choose a supplier with a good reputation and reliable quality certification. Chalco Aluminum can provide products that meet the standards, and provide corresponding technical support and after-sales service.
Check quality
Before purchasing, check the quality of the aluminum checkered plates, including surface flatness, pattern clarity, edge state, etc. Make sure there are no obvious defects, deformation or damage.
Packaging and shipping
Chalco has fully considered the way of packing and shipping the aluminum checkered plate to ensure that they will not be damaged during transportation.
Permissible deviation of 3003 aluminum tread checkered plate for oil tanker
| Bottom thickness | Bottom plate thickness tolerance | Width tolerance | Length tolerance |
| 1.00-1.20 | 0-0.18 | ±5 | ±5 |
| >1.20-1.60 | 0-0.22 | ||
| >1.60-2.00 | 0-0.26 | ||
| >2.00-2.50 | 0-0.30 | ||
| >2.50-3.20 | 0-0.36 | ||
| >3.20-4.00 | 0-0.42 | ||
| >4.00-5.00 | 0-0.47 | - | |
| >5.00-8.00 | 0-0.52 |
| Nominal length | Diagonal length difference |
| ≤4000 | ≤10 |
| >4000-6000 | ≤11 |
| >6000 | ≤12 |