5052 O tubing is primarily used in low and medium pressure hydraulic systems, fuel lines and oil lines.
Our products meet the standards：AMS4071 | AMS-WW-T-700/4 | ASTM B210 | BS EN 573 | BS EN 755 | BS EN 754.
Chalco Aluminum is a globally renowned aluminum materials manufacturer, and all our products are sold at factory prices.Email Us
| Description | OD In | Wall In |
| 5052-O 1/8 OD x 0.035 WA | 0.125 | 0.035 |
| 5052-O 3/16 OD x 0.035 WA | 0.1875 | 0.035 |
| 5052-O 1/4 OD x 0.049 WA | 0.25 | 0.049 |
| 5052-O 1/4 OD x 0.035 WA | 0.25 | 0.035 |
| 5052-O 5/16 OD x 0.035 WA | 0.3125 | 0.035 |
| 5052-O 3/8 OD x 0.028 WA | 0.375 | 0.028 |
| 5052-O 3/8 OD x 0.02 WA | 0.375 | 0.02 |
| 5052-O 3/8 OD x 0 WA | 0.375 | 0.00 |
| 5052-O 3/8 OD x 0.022 WA | 0.375 | 0.022 |
| 5052-O 1/2 OD x 0.065 WA | 0.5 | 0.065 |
| 5052-O 1/2 OD x 0.028 WA | 0.5 | 0.028 |
| 5052-O 1/2 OD x 0.022 WA | 0.5 | 0.022 |
| 5052-O 1/2 OD x 0.02 WA | 0.5 | 0.02 |
| 5052-O 5/8 OD x 0.028 WA | 0.625 | 0.028 |
| 5052-O 3/4 OD x 0.028 WA | 0.75 | 0.028 |
| 5052-O 7/8 OD x 0.035 WA | 0.875 | 0.035 |
| 5052-O 1 OD x 0.065 WA | 1 | 0.065 |
| 5052-O 1 OD x 0.028 WA | 1 | 0.028 |
| 5052-O 1 3/4 OD x 0.049 WA | 1.75 | 0.049 |
| 5052-O 1 3/4 OD x 0.035 WA | 1.75 | 0.035 |
| 5052-O 1 1/4 OD x 0.125 WA | 1.25 | 0.125 |
| 5052-O 1 1/4 OD x 0.028 WA | 1.25 | 0.028 |
| 5052-O 1 1/4 OD x 0.049 WA | 1.25 | 0.049 |
| 5052-O 1 1/4 OD x 0.035 WA | 1.25 | 0.035 |
| 5052-O 1 1/2 OD x 0.028 WA | 1.5 | 0.028 |
| 5052-O 1 1/2 OD x 0.065 WA | 1.5 | 0.065 |
| 5052-O 1 1/2 OD x 0.049 WA | 1.5 | 0.049 |
| 5052-O 1 1/2 OD x 0.035 WA | 1.5 | 0.035 |
| 5052-O 2 OD x 0.035 WA | 2 | 0.035 |
| 5052-O 2 OD x 0.065 WA | 2 | 0.065 |
| 5052-O 2 OD x 0.049 WA | 2 | 0.049 |
| 5052-O 2 OD x 0.028 WA | 2 | 0.028 |
| 5052-O 3 OD x 0.065 WA | 3 | 0.065 |
| 5052-O 3 OD x 0.049 WA | 3 | 0.049 |
| 5052-O 3 OD x 0.035 WA | 3 | 0.035 |
| 5052-O 4 OD x 0.065 WA | 4 | 0.065 |
| 5052-O 4 OD x 0.049 WA | 4 | 0.049 |
| 5052-O 0.1875 OD x 0.035 WA | 0.1875 | 0.035 |
| 5052-O 0.3125 OD x 0.035 WA | 0.3125 | 0.035 |
| 5052-O 2 1/4 OD x 0.049 WA | 2.25 | 0.049 |
| 5052-O 2 1/4 OD x 0.035 WA | 2.25 | 0.035 |
| 5052-O 2 1/2 OD x 0.049 WA | 2.5 | 0.049 |
| 5052-O 2 1/2 OD x 0.035 WA | 2.5 | 0.035 |
| 5052-O 2 1/2 OD x 0.028 WA | 2.5 | 0.028 |
| 5052-O 3 1/2 OD x 0.028 WA | 3.5 | 0.028 |
| 5052-O 3 1/2 OD x 0.049 WA | 3.5 | 0.049 |
| 5052-H112 7.087 OD x 1.7716535 WA | 7.087 | 1.772 |
| 5052-H112 8.268 OD x 0.984252 WA | 8.268 | 0.984 |
| 5052-H112 11.811 OD x 0.3937008 WA | 11.811 | 0.394 |
| 5052-H112 13.701 OD x 0.2637795 WA | 13.701 | 0.264 |
What thickness of 5052 aluminum tubing should be used for vans fuel lines?
035" wall thickness for both fuel and brakes.
5052 aluminum tubing pressure rating?
5052 aluminum alloy has a yield strength of 193 MPa (28, 000 psi) and an ultimate tensile strength of 228 MPa (33, 000 psi), which means it is moderately strong when compared to other some popular alloys.
What is 5052 O aluminum used for?
Rigid 5052-O aluminum alloy tubing is used for low and medium pressure hydraulic systems, fuel lines and oil lines.
What's the difference between 5052 and 6061 aluminum?
6061 aluminum is much harder to permanently deform than 5052 (276 MPa VS. 193 MPa), showing both its increased strength and its formability issues. 5052 aluminum has a lower yield strength, but this serves it well as it takes less work to reach the plastic (or permanent) regions of deformation.