Henan Chalco supplies aluminium extrusion profiles for caravan, motorhome and RV manufacturing. Our range includes caravan-specific body profiles, standard aluminium extrusions and industrial T-slot profiles for body connections, edge finishing, rail installation and interior framework assembly.
We support standard profile selection, matching to drawings or samples, and custom OEM extrusions, with cutting, drilling, machining and surface finishing available to suit project requirements.
Our profiles are used in truck body building, relocatable buildings, and caravan and camper construction.
Truck Body Building
Caravan/RV
Relocatable Buildings
Caravan-Specific Aluminium Extrusions and Mouldings
Henan Chalco supplies caravan-specific aluminium extrusions for body joints, edge finishing, awning installation and rainwater drainage.
Profiles can be matched to existing vehicle cross-sections or customised to suit the body structure and assembly requirements of new OEM projects.
Roof-Edge & Corner Mouldings
Roof-edge trims, sidewall corner profiles and corner guards are used at roof-to-wall joints, body corners and exposed panel edges.
Cross-sections can be customised to suit body contours, panel thicknesses and sealing arrangements, providing joint coverage, edge protection and assembly connections.
Awning & Keder Rails
Awning & Keder Rails
We supply caravan awning rails, Keder tracks and sail-track extrusions for fitting awnings, side tents and other accessories with beaded edges.
Track grooves can be matched to the Keder bead size, installation position and curvature of the vehicle body.
Gutter & Drip Rails
Caravan roof gutters, side drip rails and drainage extrusions guide rainwater along a designated path.
Drainage cross-sections can be designed around the body-edge shape, water-flow direction and fixing arrangement.
Panel-Joint & Edge Mouldings
These profiles are used for joining caravan sidewall panels and composite panels, as well as finishing their exposed edges.
H-shaped, J-shaped and custom joining profiles are available to accommodate different panel thicknesses, joint gaps and sealing arrangements.
Standard Aluminium Extrusions for Caravan Assembly
Alongside caravan-specific profiles, Henan Chalco supplies H, J, U, C and F channels, aluminium angles and other standard structural extrusions for wall-panel joints, edge finishing, door and window frames, and interior mounting structures.
Where an existing cross-section meets the assembly requirements, customers can select from our Standard Aluminium Extrusions range. Custom lengths and surface finishes are also available.
Standard profiles can be specified by alloy, length, finish and required secondary processing. Custom cross-sections are also an option where sealing grooves, snap-fit features or vehicle-body curvature call for a specific design.
Explore the full Henan Chalco Aluminium Profiles range for additional standard and custom extrusion options.
Industrial T-Slot Aluminium Profiles for Caravan Interiors
Henan Chalco offers industrial aluminium profiles in 2020, 2040, 4040, 4080 and other series for caravan cabinet frames, storage systems, partitions and equipment mounting brackets.
T-slot channels accommodate modular connectors, making them suitable for OEM projects that need flexible layouts and adjustable mounting positions.
2020 2040 Aluminium Extrusions
4040 4080 Aluminium Extrusions
3030 3060 Aluminum Extrusion
10 Series Aluminum Extrusion
15 Series Aluminum Extrusion
45 Series Aluminum Extrusion
Industrial T-slot profiles can be assembled with corner brackets, joining plates, T-nuts, bolts and other connecting hardware.
Henan Chalco supports project-specific profile sizes, cut lengths, hole machining and surface finish options.
Frames carrying equipment or exposed to vibration during vehicle operation require structural checks and appropriate validation based on actual loads, connection methods and mounting conditions.
Aluminium Alloy and Finish Options
Henan Chalco supplies 6063, 6061 and other aluminium alloy extrusions for caravan exterior trims, joining rails, door and window frames, and interior supports.
6063 is suitable for profiles where cross-section formability and surface appearance are important. 6061, 6005 and other alloys can be considered according to structural strength, machining and project requirements.
For further material options, see 6063 Aluminium Extrusions.
Natural aluminium finishes, anodised colours and custom powder-coated colours are available. Matt and wood-grain decorative effects can also be assessed to suit project requirements.
For exposed caravan profiles, surface finishes can be selected with the service environment, weather resistance requirements and body colour in mind. Interior trim profiles may place greater emphasis on colour consistency and appearance.
Choosing the Right Profile for Panel Joints, Roof Seams and Awning Tracks
Caravan aluminium profile cross-sections must fit the wall panels, seals, fasteners and vehicle-body contours. Even profiles with similar external shapes may differ significantly in groove geometry, fixing positions and assembly methods.
Check the following details for each installation position:
| Installation Area | Key Fit Requirements | Potential Fit Issues |
| Panel Joints & Edge Trims | Panel thickness, groove width and depth, overlap dimensions and seal position | Grooves that are too tight or too loose can affect panel installation and joint fit. |
| Roof-Wall Seams & Gutter Rails | Roof corners, profile contact surfaces, sealing grooves and drainage direction | Poor joint contact or a drainage path that interferes with the mounting arrangement |
| Awning & Keder Tracks | Keder bead diameter, track cavity, slot opening and sliding clearance | Accessories may be difficult to insert, slide or secure in position. |
| Mounting & Curved Sections | Mounting-hole positions, connectors, profile length and body curvature | Conflicting fixing locations or cross-section distortion after bending can affect fit. |
-
-
For existing models, provide a cross-section drawing, sample or mating dimensions for profile matching. For new models and custom projects, the profile cross-section can be developed around the panel construction, fixing method and finish requirements.
-
- For profiles involving seals, bending or Keder sliding fit, sample trial fitting is recommended before bulk procurement.
Applicable Standards and Tolerances
Caravan OEM projects may specify ASTM or EN standards according to the product form, alloy and acceptance requirements.
- ASTM B221-21: Product specification for extruded aluminium and aluminium-alloy bars, rods, profiles and tubes
- EN 755-2: Mechanical property requirements for extruded aluminium products
- EN 755-9: Dimensional and form tolerances for general engineering extrusion profiles
- EN 12020-2: Dimensional and form tolerances for precision extrusion profiles in EN AW-6060 and EN AW-6063
Key dimensions and tolerances for close-fitting panel grooves, sealing interfaces and mounting locations can be specified separately on the drawing.
Where profiles require cutting, drilling or CNC machining, finished-part dimensions and acceptance criteria should be defined separately from the as-extruded profile tolerances.
Profile Sourcing and Customization Options
Henan Chalco supports profile sourcing and customisation, from standard extrusions to OEM-specific cross-section development. Profile and secondary processing options can be coordinated around existing designs, assembly requirements and planned production volumes.
Our caravan aluminium extrusions are available in a range of sizes and lengths.
-
Standard Profile Supply
Select from existing H/J/U/C/F channels, aluminium angles and T-slot series, with custom length and surface finish options.
-
Drawing or Sample Matching
Match profiles to existing drawings or physical samples for established vehicle models and replacement orders.
-
Custom OEM Extrusions
Develop application-specific cross-sections to suit new vehicle assembly requirements, with tooling development and sample approval.
Secondary Processing and Surface Finishing
Henan Chalco supports cut-to-length, drilling, CNC machining and surface finishing of aluminium extrusions to project drawings and assembly requirements for body joints, rail installations and interior structures.
Processing combinations, dimensional tolerances and finishes are confirmed according to the profile geometry and order specification. For additional options, see Custom Aluminium Extrusion Services.
For bulk OEM orders, tooling arrangements, samples, MOQ and production lead times can be agreed based on the profile specification, forecast quantity and delivery plan.
Inspection & Quality Documentation
- Dimensional Inspection — Check critical cross-section dimensions, wall thickness, straightness, cut length and machined hole positions.
- Surface Inspection — Check for scratches, dents, anodised or coated appearance, and colour consistency.
- Documentation & Traceability — MTCs, COCs, inspection records and batch traceability documents can be supplied or coordinated as specified in the order.
Packaging & Bulk Delivery
Henan Chalco offers several packaging options for aluminium extrusions, including shrink-wrap, cartons and combined protective packaging. For long or finished caravan profiles, interleaving, end protection and additional securing can be used to reduce the risk of scratches, impacts and distortion in transit.
For bulk OEM orders, profiles can be packed and labelled by specification, length and colour for easier goods receipt, storage and production picking. Special packaging such as pallets or wooden crates can be agreed according to transport requirements and order conditions.
Related Products
Henan Chalco offers a one-stop supply of aluminium extrusion profiles for caravan bodies, doors and windows, interiors, roofs and related systems, supporting standard profile selection, custom processing and bulk OEM procurement.
Aluminum Window Profiles
Aluminum Door Profiles
Aluminum Handle Profiles
Solar Panel Aluminum Profiles
Aluminum Cabinet Profiles
Aluminum RV Corner Profile
Frequently Asked Questions
Can you match existing caravan aluminium profiles without CAD drawings?
Yes. You can provide a physical sample, cross-section photos and key dimensions.
Henan Chalco can use these to assess suitable existing profiles or a custom solution.
Do custom caravan extrusions always require new tooling?
Not necessarily. If an existing die or standard cross-section meets the requirements, it may be used. Special cross-sections are evaluated to determine whether new tooling is needed.
Can aluminium profiles be supplied with machining and surface finishing?
Yes. Depending on the profile geometry and order requirements, cut-to-length, drilling, CNC machining, anodising and powder coating can be arranged.
What determines MOQ and delivery lead time?
MOQ and lead time depend on profile specifications, tooling arrangements, processing requirements and order quantity. Terms are confirmed at quotation.
Request a Quote for Aluminium Caravan Extrusions
Whether you need caravan-specific extrusions, standard aluminium profiles or industrial T-slot sections, Henan Chalco can assist with profile selection, custom solutions and quotations for bulk orders based on your project specifications.
For an accurate quote, please provide the following information:
- Product / Application — Required profile type and installation position
- Drawing / Sample — Cross-section drawing, sample photos or key dimensions
- Order Quantity — Order volume or estimated annual requirement
Where applicable, also include alloy and temper, surface finish, panel mating dimensions, machining needs, inspection standards and destination to help us assess the supply proposal more accurately.
Send Your Drawing · Request a Quote
Send your drawing or sample details to Henan Chalco for a caravan OEM profile proposal and quotation.
Chalco can provide you the most comprehensive inventory of aluminum products and can also supply you customized products. Precise quotation will be provided within 24 hours.
Get a quote












