1. Home
  2. >Recommend
  3. >Aluminum Strut Channel

Aluminum Strut Channel

Notice: Production MOQ 500 kg. China-based stock available for project procurement and bulk orders.

Aluminum strut channel is an aluminum alloy mounting and support profile with inward-turned lips. Together with matching channel nuts and fittings, it forms an adjustable support system widely used for cable trays, piping and equipment installation.

Aluminum strut channel profile with inward-turned lips.

Henan Chalco has tooling for certain standard channel profiles and also supports custom cross-sections based on customer drawings, helping engineering and procurement teams match mounting dimensions, connection details and project requirements.

If you already have a target cross-section or project drawings, please email us the dimensions, intended application and purchasing quantity. We can then check existing tooling and evaluate a custom supply solution.

Instant Quote

Types of Aluminum Strut Channel

Henan Chalco offers various aluminum strut channel configurations, including standard, shallow, deep, combined and mini channels, with different back-hole patterns to suit installation requirements. These products are used for cable trays, pipe supports and equipment mounting. Custom cross-sections and hole patterns can also be produced from customer drawings.

Standard solid strut channel

Typical dimensions:1-5/8" × 1-5/8"

Standard C-shaped channel with inward-turned lips and no pre-punched holes. Supports adjustable mounting with channel nuts for cable trays, pipe hangers, and equipment supports.

Standard solid strut channel
Shallow strut channel

Shallow strut channel

Typical dimensions:1-5/8" × 13/16"

The low-profile design reduces installation depth while retaining standard channel width, making it suitable for wall brackets, equipment interiors and support structures where mounting space is limited.

Deep strut channel

Typical dimensions:1-5/8" × 2-7/16", 1-5/8" × 3-1/4"

Deeper profile for increased bending stiffness and improved deflection control in demanding support systems. Load capacity depends on wall thickness and installation conditions.

Deep strut channel
Back-to-back strut channel

Back-to-back strut channel

Typical dimensions:Single channel 1-5/8" × 1-5/8"; assembled 1-5/8" × 3-1/4"

Back-to-back channels with opposing openings for two-sided mounting, pipe brackets, and multi-level support structures.

Side-by-side strut channel

Typical dimensions:3-1/4" × 1-5/8"

Side-by-side twin channels with parallel mounting interfaces for multi-point fixing, equipment installation, and support frames.

Side-by-side strut channel
Mini strut channel

Mini strut channel

Typical dimensions:13/16" × 3/8"

This compact aluminum channel occupies less space and can be used with appropriately sized small fasteners. Applications include electrical cabinets, equipment enclosures and lightweight modular mounting systems.

Slotted strut channel

Typical hole patterns:9/16" × 1-1/8" short slots; 13/32" × 3" long slots

Pre-punched oblong slots allow adjustable mounting and easy alignment. Short- or long-slot options for cable trays, pipe hangers, and MEP systems.

Slotted strut channel
Round-hole strut channel

Round-hole strut channel

Typical hole pattern:Ø9/16"; hole center spacing 1-7/8"

Pre-punched round holes for fixed mounting, repeatable positioning, and standardized assemblies, with custom hole sizes and spacing.

Knockout strut channel

Typical hole pattern:Ø7/8" knockouts; hole center spacing 6"

Pre-formed knockouts in the back allow selected holes to be opened as needed. This design is suitable for electrical installations requiring reserved cable or conduit penetrations and reduces additional on-site drilling.

Knockout strut channel
Telescoping strut channel

Telescoping strut channel

Cross-section:1-7/8" × 1-7/8"

Telescoping channels allow adjustable lengths and mounting positions, secured by pins or fasteners. Suitable for modular supports with custom fit dimensions.

Henan Chalco can customize channel cross-sections and hole patterns from customer drawings, including hole diameter, spacing and layout, to meet the connection requirements of different mounting systems.

If you cannot find a suitable aluminum strut channel type, please email Chalco your cross-section dimensions, installation requirements or product drawings. We can help identify a suitable model and custom supply option.

Find Suitable Model

Common aluminum alloys for strut channels

Henan Chalco supplies aluminum strut channels made from 6063, 6005 and 6005A alloys for a range of industrial mounting and structural support needs. The material temper, cross-sectional dimensions and engineering requirements should be considered when selecting the product.

  • 6063 Aluminum strut channel
    6063 Aluminum strut channel

    6063 aluminum strut channels are available in T5 and T6 tempers. Their good extrudability, surface finish and corrosion resistance make them suitable for electrical installations, equipment brackets and general industrial support structures.

    Good extrudabilitygood surface qualitycorrosion resistance
  • 6005 Aluminum strut channel
    6005 Aluminum strut channel

    6005 aluminum strut channels commonly use the T5 temper. They offer good mechanical properties and suitability for structural applications such as industrial equipment brackets and mounting systems requiring strength and stability.

    Good mechanical strengthsuitable for structural supportscorrosion resistance
  • 6005A Aluminum strut channel
    6005A Aluminum strut channel

    6005A aluminum strut channels commonly use the T5 temper, balancing strength and extrusion performance. They are suitable for industrial support structures with requirements for load-bearing design, section stability and reliable installation.

    Good strengthgood extrusion performancesuitable for load-bearing structures

Popular sizes of aluminum strut channel

  • 6063-T5 Mini aluminum strut channel 13
    6063-T5 Mini aluminum strut channel – 13/16" × 3/8"Mini aluminum strut channel with a 1/16" wall thickness and common lengths of 48", 72", 96" and 144". The compact cross-section features inward-turned lips and works with matching miniature fasteners.
    Inquire Now
  • 1-5 8 x 1-5 8 Aluminum
    1-5/8" x 1-5/8" Aluminum Solid Strut Channel 18"6005-T5 Standard solid aluminum strut channel – 1-5/8" × 1-5/8"Made from 6005-T5 aluminum alloy with a wall thickness of 0.098" (12 Gauge). Common lengths include 18", 2', 3', 4', 5', 6', 8', 10' and 20'.
    Inquire Now
  • 6063-T6 Shallow solid aluminum strut channel
    6063-T6 Shallow solid aluminum strut channel – 1-5/8" × 13/16"Shallow aluminum strut channel with a 0.080" wall thickness and common lengths of 10' and 20'. Its low-profile design reduces mounting depth and accommodates matching channel nuts and fittings. Suitable for wall brackets, equipment interiors and space-constrained support systems.
    Inquire Now
  • 6005-T5 Shallow solid aluminum strut channel
    6005-T5 Shallow solid aluminum strut channel – 1-5/8" × 13/16"Made from 6005-T5 aluminum alloy with a 0.078" wall thickness. Common lengths include 1', 4', 5', 10' and 20'. The channel back has no pre-punched holes. Suitable for electrical equipment mounting, wall brackets and MEP support structures requiring lower installation height.
    Inquire Now
  • 6005A-T5 Standard aluminum strut channel 1-5
    6005A-T5 Standard aluminum strut channel – 1-5/8" × 1-5/8"Extruded from 6005A-T5 aluminum alloy with a 0.103" wall thickness and common lengths of 10' and 20'. The standard inward-lipped cross-section accommodates matching channel nuts and fittings for industrial equipment brackets, MEP services and structural support systems.
    Inquire Now
  • 6063-T5 Deep aluminum strut channel 1-5
    6063-T5 Deep aluminum strut channel – 1-5/8" × 2-7/16"Made from 6063-T5 aluminum alloy with a 0.081" wall thickness and common lengths of 10' and 20'. The deeper section can increase bending stiffness in certain directions, making it suitable for pipe hangers and industrial mounting systems that require span and deflection control.
    Inquire Now
  • 6063-T6 Deep aluminum strut channel 1-5
    6063-T6 Deep aluminum strut channel – 1-5/8" × 3-1/4"Deep aluminum strut channel with a 0.105" wall thickness and common lengths of 10' and 20'. Its taller inward-lipped cross-section suits equipment supports and pipe mounting systems requiring greater channel depth. Actual load capacity depends on span and fixing conditions.
    Inquire Now
  • 6005-T5 Short-slotted aluminum strut channel 1-5
    6005-T5 Short-slotted aluminum strut channel – 1-5/8" × 1-5/8"Standard short-slotted aluminum channel with a 0.098" wall thickness, 1-1/8" × 9/16" oblong slots and 2" hole-center spacing. Common lengths include 1', 4', 6', 10' and 20'. Regular slots in the back simplify bolted fixing and positional adjustment for electrical brackets, pipe hangers and MEP installations.
    Inquire Now
  • 6005-T5 Long-slotted aluminum strut channel 1-5
    6005-T5 Long-slotted aluminum strut channel – 1-5/8" × 13/16"Shallow long-slotted aluminum channel with a 0.078" wall thickness, 3" × 13/32" oblong slots and 4" hole-center spacing. Common lengths are 10' and 20'. The longer slots provide greater longitudinal adjustment for brackets that need on-site alignment or mounting-position changes.
    Inquire Now
  • 6005-T5 Deep short-slotted aluminum strut channel
    6005-T5 Deep short-slotted aluminum strut channel – 1-5/8" × 3-1/4"Deep short-slotted aluminum channel with a 0.098" wall thickness and 1-1/8" × 9/16" oblong slots in the back. Common lengths include 1', 4', 5', 10' and 20'. The deeper section and pre-punched holes suit cable trays, pipe supports and industrial mounting structures requiring connection-position adjustment.
    Inquire Now
  • 6063-T6 Back-to back aluminum strut channel
    6063-T6 Back-to-back aluminum strut channel – 1-5/8" × 3-1/4"Back-to-back combined aluminum strut channel with a 0.105" wall thickness per single channel and common lengths of 10' and 20'. Two channels are joined at their backs to form opposing openings, allowing channel nuts and fittings to be installed on both sides. Suitable for two-sided equipment fixing and combined supports.
    Inquire Now
  • 6005-T5 Back-to back short-slotted aluminum strut
    6005-T5 Back-to-back short-slotted aluminum strut channel – 1-5/8" × 3-1/4"Back-to-back short-slotted aluminum channel with a 0.098" wall thickness per single channel and 1-1/8" × 9/16" oblong slots in the back. Common lengths include 1', 4', 6', 10' and 20'. The opposing openings and pre-punched holes suit multidirectional mounting, combined pipe brackets and equipment fixing.
    Inquire Now

If you cannot find an aluminum strut channel in the required specification, please email us the cross-section dimensions, wall thickness, length or product drawings. Chalco can check existing tooling and custom supply options.

Share Specs

One-stop supply of aluminum strut channel accessories

In addition to aluminum strut channels, Henan Chalco offers one-stop sourcing of channel nuts, connectors, pipe clamps and fasteners to support customer installations. Matching fittings to the channel cross-section, connection method and project bill of materials reduces the need to source components separately and check mounting interfaces across suppliers.

Channel nuts and spring nuts

Channel nuts and spring nuts are available as matching options. They engage with the channel's inward-turned lips to secure angle brackets, pipe clamps and equipment mounts. The connection can be selected according to slot dimensions and thread specifications.

Angle brackets and flat plates

Matching L-shaped angle brackets, flat splice plates and other connecting plates are available for right-angle joints, channel extensions and combined bracket assemblies, supporting installation in different directions.

Pipe clamps and beam clamps

Matching pipe clamps and beam clamps can secure piping and connect channel brackets to primary structures such as steel beams. Suitable clamp specifications depend on pipe diameter, beam flange dimensions and mounting location.

Threaded rods and fasteners

Matching threaded rods, bolts, nuts and washers are available for suspended mounting, bracket connections and equipment fixing. Thread dimensions, lengths and fastener materials can be selected according to the project's connection requirements.

Aluminum strut channel applications

Henan Chalco aluminum strut channels serve as support profiles in industrial equipment, electrical systems and mechanical/electrical installations. Together with channel nuts, angle brackets, pipe clamps and other fittings, they can form various fixed brackets and mounting frames. The appropriate channel specification should be selected based on project loads, mounting structure and service environment.

Electrical and instrumentation support

Used to support electrical control cabinets, junction boxes, conduits, instrument panels and linear lighting. Channels and fittings can form wall-mounted brackets or suspended crossmembers, making equipment positioning, conduit routing and future maintenance easier.

Electrical and instrumentation support
Pipe and HVAC support

Pipe and HVAC support

Used as mounting brackets for industrial pipes, ductwork and HVAC equipment. Combined with pipe clamps, threaded rods and angle brackets, channels can form trapeze hangers, wall brackets or rooftop equipment supports for various pipe diameters and layouts.

Solar mounting support

Aluminum strut channels support crossmembers and brackets in solar installations. PV rail compatibility, mounting methods, and wind and snow loads must be verified.

Solar mounting support

If you are selecting aluminum strut channels for electrical equipment, pipe brackets or other mounting systems, please email Henan Chalco the application and installation requirements. We can help identify a suitable channel configuration.

Match My Application

Aluminum strut channel surface finishes

Henan Chalco offers mill finish, anodized and powder-coated aluminum strut channels to suit the service environment, corrosion-resistance needs and appearance requirements of industrial equipment mounts, pipe supports and outdoor brackets.

  • Mill finish: Retains the natural metal surface of the extruded aluminum alloy without an additional coating. Suitable for indoor equipment brackets, concealed mounting structures and channels requiring further machining.
  • Anodized finish: Aluminum anodizing creates a protective oxide layer that improves corrosion and wear resistance. Natural silver, black and other appearances can be selected as required. Suitable for industrial equipment brackets, electrical installations and applications needing durable surfaces.
  • Powder coating: Creates a colored protective coating on the channel surface. Black, white and other colors can be specified for exposed brackets, equipment frames and projects with appearance or weather-resistance requirements. For a comparison of coating properties and other processes, see the aluminum surface treatment guide.
Mill finish aluminum strut channel

Mill finish aluminum strut channel

Clear anodized aluminum strut channel

Clear anodized aluminum strut channel

Black powder coated aluminum strut channel

Black powder coated aluminum strut channel

Surface finish considerations

For outdoor, humid or coastal environments, select surface protection according to the corrosive agents, expected service life and maintenance conditions. When using stainless-steel fasteners, assess the risk of galvanic corrosion between dissimilar metals. Where electrical grounding is required, confirm that the surface coating does not impair the specified electrical connection.

Henan Chalco offers various surface finishes and colors and can help customers select channel configurations based on alloy temper, corrosion-resistance requirements and installation environment. Please contact us by email for finishing and color-matching advice.

Config Advice

Aluminum strut channel load capacity and engineering selection

Aluminum strut channels with different section depths and wall thicknesses have different load-bearing characteristics. Henan Chalco can review the support span, load type and project drawings to help select appropriate channel specifications and check load and deflection requirements.

Reference load capacity for different cross-sections

The following comparison uses data for comparable 6005-T5 aluminum channels, based on simply supported ends, static uniformly distributed loads and a maximum deflection limit of L/240.

Aluminum channel cross-section 72" span 84" span 96" span
1-5/8" × 13/16"(Shallow) 17 lb 12 lb 8 lb
1-5/8" × 1-5/8"(Standard) 112 lb 83 lb 63 lb
1-5/8" × 2-7/16"(Deep) 310 lb 231 lb 178 lb

Load differences between solid and slotted channels

Holes in the channel back change local load behavior, so solid, short-slotted and long-slotted channels cannot be assigned exactly the same load ratings.

Example: standard 1-5/8" × 1-5/8" channel with a 72" simply supported span.

Hole pattern Reference total uniformly distributed load at L/240
Solid Approx. 112 lb
Short-slotted Approx. 95 lb
Long-slotted Approx. 101 lb

Even with identical section width and depth, the hole pattern affects load-bearing selection. Projects with specified spans and loads should be checked against technical data for the corresponding hole pattern.

Concentrated loads and connection capacity

The figures above apply to uniformly distributed loads under the specified conditions. If equipment weight is concentrated at the channel midpoint or the channel is cantilever-mounted, the corresponding bending moment, deflection and loads at the fixed end must be recalculated.

The slip resistance and pull-out capacity of channel nuts, as well as the connection capacity of angle brackets, bolts and anchors, must also be verified separately. A beam load table cannot be used as a load-capacity guarantee for the complete support assembly.

Engineering selection and technical confirmation

For projects with specific load requirements, customers can email Henan Chalco the channel cross-section, support span, load, installation method and connection drawings so that suitable specifications and technical conditions can be checked.

Get Spec Advice

Henan Chalco aluminum strut channel customization and fabrication

Henan Chalco has tooling for some standard aluminum strut channel profiles and supports custom aluminum channels made to customer drawings. We can provide coordinated solutions from profile extrusion through secondary processing, based on the cross-section, dimensions and installation requirements.

  • Existing tooling: Certain standard channel dies are available. Cross-section width, depth, wall thickness and slot dimensions can be checked against customer requirements to avoid unnecessary tooling development.
  • Custom dies and extrusion: Henan Chalco provides custom aluminum extrusion services and can develop non-standard channel cross-sections from CAD drawings to accommodate special slots, inward-turned lips and wall thicknesses.
  • Cut to length: Specified lengths and end finishing can be evaluated to simplify subsequent bracket assembly and on-site installation.
  • Hole making and machining: Round holes, oblong slots, drilling, milling and deburring can be evaluated against customer drawings. For precision machining requirements, suitable options can be confirmed through Henan Chalco's CNC aluminum machining services.
  • Surface treatment: Anodizing, powder coating and other surface finish options can be assessed based on the service environment and appearance requirements.

knowledge cnc-aluminum machining

If you require aluminum strut channels with special sections or machined holes, please email Henan Chalco the product drawings, dimensions, processing requirements and order quantity. We can help confirm the tooling and fabrication approach.

Share Specs

Aluminum strut channel pricing and purchasing advantages

Volume discounts and custom pricing

Henan Chalco offers discounted pricing for large-volume orders and long-term customers, with flexible custom quotations based on product specifications, processing requirements and order quantity.

Free samples for testing

Henan Chalco provides free aluminum strut channel samples so customers can evaluate product dimensions, surface quality and installation fit before bulk purchasing.

Fast, free quotations

Simply provide the required cross-section dimensions, length, alloy temper, surface finish and order quantity. We can quickly prepare a free quotation to help with purchasing budgets and project planning.

Email us your aluminum strut channel purchasing requirements to receive a quotation, volume pricing and a proposed supply solution.

Instant Quote

Related aluminum strut channel products

In addition to aluminum strut channels, Henan Chalco supplies aluminum alloy profiles for industrial supports, equipment mounting and frame construction, accommodating different structures and connection methods.

Aluminum strut channel quality inspection and documentation

Aluminum strut channel quality depends not only on material properties but also on cross-sectional accuracy, slot dimensions, hole positions and fitting compatibility. Henan Chalco can define inspection items according to product drawings, applicable standards and order requirements, helping customers control assembly errors and verify that delivered products meet procurement specifications.

Key quality inspection items

Inspection item Main inspection requirements
Material verification Verify alloy designation, temper and chemical composition, and confirm mechanical properties according to the applicable standard or order requirements.
Cross-section dimensions Check channel width, depth, wall thickness, clear slot opening and inward-turned lip dimensions against the cross-section drawing.
Hole dimensions and spacing Inspect dimensions, center spacing and positional deviations of oblong slots, round holes and other openings to ensure accurate mounting-hole locations.
Straightness and geometry Check profile straightness, twist, length and cut-end quality to reduce misalignment during bracket assembly.
Surface quality Inspect scratches, dents, surface defects and machining burrs. For surface-treated products, check coating or oxide film according to agreed requirements.
Fitting compatibility Carry out fit checks using specified channel nuts and connectors to verify slot geometry and practical assembly compatibility.

Applicable material and dimensional standards

Reference standard Main scope
ASTM B221 / B221M Material, chemical composition and relevant mechanical property requirements for extruded aluminum and aluminum alloy products.
EN 755-9 Dimensional and form tolerances for aluminum alloy extruded profiles, including straightness, twist and section dimensions.
ISO 6362-4 Dimensional and form tolerances for extruded aluminum alloy profiles used in engineering applications.

The applicable standards and acceptance tolerances should be confirmed in the order. Special inspection requirements for inward-turned lips, non-standard hole patterns and fitting dimensions must also be specified in customer drawings.

Inspection reports and material traceability

Depending on the project and order requirements, available quality documentation may include material certificates, chemical composition and mechanical test reports, dimensional inspection records, and relevant surface-finish inspection data.

For projects requiring EN 10204 3.1 inspection documents or third-party testing, the document type, inspection items and acceptance criteria should be specified before ordering so that suitable testing and delivery arrangements can be confirmed.

Where channels must fit an existing support system, Henan Chalco can use the critical cross-sectional dimensions and assembly requirements to define acceptance priorities, helping avoid incompatible fittings and on-site installation issues after bulk purchase.

Aluminum strut channel packaging and transportation

Henan Chalco offers packaging and transportation options suited to the length, surface finish and order quantity of aluminum strut channels. They protect channel surfaces, slots and cut ends and help reduce scratches, distortion and impact damage in transit.

  • Protective film packaging: PE/PVC protective film covers channel surfaces to reduce scratches during handling and transportation, particularly for anodized or powder-coated products.
  • Kraft paper and cushioning: Profiles are wrapped and separated with kraft paper, foam or interlayers to reduce friction and impact between channels and protect the inward-turned lips and surface finish.
  • Carton and wooden crate packaging: Suitable for short channels, samples and matching fittings. Cartons or reinforced wooden crates can be selected according to product length and transportation requirements for added protection.
  • Palletized and bundled packaging: Long channels and bulk quantities are stacked in layers, strapped and secured to pallets for forklift handling, reducing the risk of movement and bending during transport.
  • FCL and LCL shipping: Full container load (FCL) and less-than-container load (LCL) options are available. Suitable ocean freight arrangements can be made according to order quantity, package dimensions and destination port.
  • Custom packaging: Special protective measures, package labels and packing plans can be provided according to customer needs for transportation, storage and receipt at the project site.
Protective film packaging for aluminum strut

Protective film packaging for aluminum strut channel

Kraft paper wrapped aluminum extrusion bundles

Kraft paper wrapped aluminum extrusion bundles

Wooden crate packaging for aluminum profiles

Wooden crate packaging for aluminum profiles

Palletized aluminum profile bundles for shipment

Palletized aluminum profile bundles for shipment

Full container load of aluminum extrusion

Full container load of aluminum extrusion profiles

Consolidated cargo shipment with wooden crates

Consolidated cargo shipment with wooden crates and pallets

Frequently asked questions

Can aluminum strut channel replace steel strut channel?

Aluminum channels weigh less and offer good atmospheric corrosion resistance, making them suitable for many mounting situations traditionally using steel channels. However, aluminum alloys and steel differ in strength and elastic modulus; identical cross-sectional dimensions do not mean identical load ratings. The span, load, deflection and connection strength must be checked before replacement.

Are aluminum strut channels compatible with Unistrut fittings?

Some aluminum channels can be matched to an existing support system based on cross-section and connection requirements, but fitting compatibility cannot be determined from external dimensions alone. Check clear slot width, lip dimensions, channel depth and nut design. For existing Unistrut or other branded systems, provide cross-section drawings or fitting samples for a compatibility review.

Can aluminum strut channel be used outdoors?

Yes. Aluminum alloys provide good resistance to atmospheric corrosion and can be used for outdoor equipment brackets, rooftop services and auxiliary mounting structures. In coastal, high-humidity or chemically corrosive environments, select the alloy and surface finish based on the conditions and consider galvanic corrosion where dissimilar-metal fasteners come into contact.

Can the hole size, spacing and channel length be customized?

Yes. Henan Chalco can evaluate custom channel lengths, round holes, oblong slots, hole spacing and hole layouts from drawings. Where channels need to match existing equipment hole positions, the fabrication approach can be determined from mounting drawings to reduce on-site drilling and adjustments.

Can existing tooling be used to reduce production costs?

Henan Chalco has dies for certain standard aluminum channel sections. When the cross-sectional dimensions, wall thickness and slot geometry match existing dies, new extrusion tooling may be unnecessary. The need for new dies and any related costs must be determined after reviewing the drawings.

How is aluminum strut channel load capacity determined?

Load capacity depends on the actual cross-section, alloy temper, span and loading conditions. In addition to bending strength and deflection, the pull-out capacity of channel nuts, slip resistance of connectors and anchorage must be verified. Projects with defined loading requirements should use confirmed cross-sectional data for engineering calculations rather than applying other manufacturers' load tables directly.

Can material certificates and inspection reports be provided?

Material certificates, chemical composition and mechanical test reports, and dimensional inspection records can be confirmed according to order requirements. For EN 10204 3.1 documents or third-party testing, the applicable standards, inspection items and document type should be defined before ordering to confirm the delivery arrangements.

Request a quote for aluminum strut channel

Henan Chalco supplies standard and custom aluminum strut channels and can check existing tooling or evaluate production of special cross-sections. Please provide the required section dimensions, wall thickness, alloy, hole specifications, lengths and purchasing quantity. If the channels must fit an existing support system, you may also send product drawings or connector specifications. Our team will confirm available specifications, production options and pricing based on the project requirements.

Instant Quote

Do you have the aluminum you need?

Welcome to contact us

  • Alloy, temper, size, and quantity review
  • Drawing, sample, and standard support
  • Available materials and integrated project supply
  • Product demand
  • Name
  • Phone number or WhatsApp
  • Email
  • content

Production MOQ 500 kg. Integrated supply for projects and volume orders.