1. Home
  2. >Recommend
  3. >Swaged Aluminum Tubing for OEM Tube Assemblies

Swaged Aluminum Tubing for OEM Tube Assemblies

Notice: Production MOQ 500 kg. China-based stock available for project procurement and bulk orders.

Henan Chalco supplies single- and double-end swaged aluminum tubing in common outside diameters of 3/4″, 1″, 1-1/4″, and 1-1/2″, with other sizes available to order. The reduced end is formed integrally with the tube for joining multiple sections. Optional spring buttons allow quick assembly.

Swaged aluminum tubing with precision-formed ends, spring button fittings and drilled holes for OEM assemblies

Alloy, wall thickness, reduced-end dimensions, length, and surface finish can be customized to drawings. End caps, rubber feet, and bases are also available as accessory options. For example, a 1″ OD swaged tube can have a cut length of 25-11/16″ and provide approximately 24″ of effective assembled length.

Send your drawing or sample to request a quote for custom swaged aluminum tubing.

Instant Quote

Why Choose Swaged Aluminum Tubing?

  • Fewer Connectors: Integrally formed reduced ends reduce the need for separate sleeves and welded joints.
  • Quick Assembly: Tube sections fit directly together, with optional spring buttons.
  • Flexible Customization: Single- and double-end swaging and different transition profiles are available.
  • Easier Transport: Sections can be stored separately and assembled on site.
Two silver aluminum tubes with formed ends and drilled holes
Rows of silver aluminum tubes with reduced-diameter ends
Swaged aluminum tube sections with drilled holes on a blue background

Swaged End Configurations for Tube Assemblies

Henan Chalco can supply swaged aluminum tubing with different end configurations based on customer drawings or samples.

Swaged tubing can be specified by the number of reduced ends and the transition profile. These features can be combined to suit the drawing, such as a single straight reduced end or tapered transitions at both ends.

Single-End Swaged

One end is reduced while the other retains the original tube cross-section, allowing sectional tubes to be assembled with slip-fit joints.

Close-up of a round metal tube with a reduced-diameter end
Assorted formed metal tubes with different end profiles on a blue

Double-End Swaged

Both ends are reduced for assemblies that require connections to other tube sections at each end.

Straight Reduced End

A smaller-diameter section with a relatively constant cross-section is formed at the tube end for insertion into a mating tube.

Round metal tube with a straight reduced-diameter end
Metal tube fitting with a tapered transition between two diameters

Tapered Transition

The tube diameter decreases gradually through a localized transition. Transition length and profile are defined by the drawing.

Connection and customization options: Swaged ends can incorporate locating holes, spring buttons, pin or bolt connections, as well as slotting and deburring, to meet assembly requirements. Swaging of square aluminum tubes can be evaluated according to the cross-section and forming requirements.

Custom End-Forming Options:

  • Slip-Fit Connection: The reduced end slides directly into the mating tube to join the sections.
  • Spring Button Connection: A spring button engages a locating hole for quick positioning, assembly, and removal.
  • Pin / Bolt Connection: A pin or bolt secures the joint in assemblies that require mechanical locking.

Special end configurations can be combined to suit drawings. The processing method depends on tube diameter, wall thickness, and material temper.

Instant Quote

Two metal tubes, one with a reduced end for slip-fit assembly

Slip-Fit Connection

Black swaged metal tubes with spring buttons at the reduced ends

Spring Button Connection

Silver tubing joint secured with two visible fasteners

Pin / Bolt Connection

For structures requiring a continuous diameter change over a longer tube section or a change in wall thickness, see Aluminium Reducer Pipe product.

Custom Swaged Aluminum Tubing Specifications

Henan Chalco supplies round and custom square swaged aluminum tubing in a range of sizes. Common round-tube outside diameters include 3/4″, 1″, 1-1/4″, and 1-1/2″. Reduced-end dimensions, wall thickness, length, and connection features can be customized to drawings.

Specification Reference Sizes and Custom Options
Common Tube Outside Diameters 3/4″ (19.05 mm), 1″ (25.4 mm), 1-1/4″ (31.75 mm), 1-1/2″ (38.1 mm)
Alloy and Temper 6061-T6, 6063-T5, 6063-T6
Swaged-End Dimensions Reduced outside diameter, reduced-section length, and transition dimensions to drawing
Additional Processing Locating holes, slotting, deburring, anodizing, powder coating, and other options

For slip-fit swaged tubing, please specify the mating tube inside diameter, required reduced-end outside diameter, and reduced-section length.

If the overall assembled length must be controlled, specify both the individual tube lengths and the required assembled length so the finished dimensions can be confirmed against the drawing.

Tube Type Outside Diameter / Cross-Section Wall Thickness Length
Round Swaged Tube 1″ 0.038″ To Drawing
Round Swaged Extension Tube 1-1/4″ 0.038″ Nominal Extension Length: 24″
Single-End Swaged Round Tube 2″ 0.060″ 72″
Square Swaged Tube 1″ × 1″ To Drawing 17-3/4″
Threaded Swaged Connecting Rod 1″ To Drawing 16″, 19″, 22.5″, 27″, 29″

For a swaged tube with a 1″ outside diameter and an effective assembled length of 24″ per section, a typical individual-section length tolerance of ±1/16″ may be used as a reference.

Tolerances for other sizes and critical dimensions can be confirmed against customer drawings and acceptance requirements.

Instant Quote

Surface Finishes & Colors

Henan Chalco offers a range of surface finishes and colors for swaged aluminum tubing:

Anodizing

Anodizing

Powder Coating

Powder Coating

Mill Finish (Natural Aluminum)

Mill Finish (Natural Aluminum)

Other finishes can be specified as needed. Coating thickness at the slip-fit joint must be considered when determining assembly clearance.

Alloy Selection and End-Forming Feasibility

Henan Chalco supplies swaged tubing in 6061 and 6063 aluminum alloys.

Alloy and Temper Selection Guidance
6063-T5 Suitable for support poles and frame components requiring good surface appearance, moderate mechanical strength, and reliable assembly.
6063-T6 Suitable for tubular assemblies requiring higher strength along with good surface appearance.
6061-T6 Suitable for industrial connecting tubes with more demanding mechanical strength and structural requirements.

Swaging plastically deforms the tube end. For large reductions, thin walls, or short transition zones, the risks of cracking, wrinkling, and cross-sectional distortion require particular attention.

Forming feasibility in T5 and T6 tempers depends on the specific dimensions and processing conditions. Where necessary, the forming and heat-treatment sequence can be adjusted, with final requirements confirmed against the specified delivery temper.

For components requiring cutting to length, drilling, punching, or surface finishing, processing can be arranged to the drawing. For more processing options, see Custom Aluminum Tube Processing.

For complex reduced-end designs, sample approval is recommended to verify forming quality and fit before finalizing the batch production plan.

Applications of Swaged Aluminum Tubing

Swaged aluminum tubing is commonly used in tubular structures designed for sectional transport, on-site assembly, or repeated disassembly.

Common applications include:

Display Stands and Flagpoles

Used to connect sections of portable display stand posts, flagpoles, and advertising supports for easier transport and on-site assembly.

Portable feather advertising flags mounted on support poles
Collage showing metal tent pole ends and push-fit connections

Tent and Awning Support Poles

Used at the joints of tent frames and awning support poles. Locating holes or spring buttons can enable quick assembly and disassembly.

Antenna and Communication Masts

Used to join sections of antenna masts and antenna support arms. Joint strength and wind-load requirements must be checked against the structural design.

Communication antenna mounted on a tall rooftop support mast
Greenhouse with metal frame structure and planted growing beds

Greenhouse and Modular Frames

Used as connecting sections in round- or square-tube frames for lightweight structures assembled on site.

Roof Snow Retention Systems

Used to join horizontal tube sections in snow retention rails, with either swaged ends or separate connectors. The design must meet the project-specific snow-load requirements.

Tubular snow retention rails installed on a sloped metal roof

For projects requiring complete tent pole assemblies, see Aluminum Tent Poles.

Manufacturing & Custom Processing Capabilities

Henan Chalco can coordinate aluminum tube swaging and secondary processing to customer drawings for a range of custom OEM assemblies.

  • Tube End Forming: End swaging, localized tapered forming, and special cross-section forming.
  • Secondary Machining: Cutting to length, drilling, punching, slotting, bending, and deburring.
  • Assembly Verification: Checking reduced-end dimensions, hole locations, and the fit of mating tube sections as required.

Sample approval, surface finishing, and finished-product acceptance can be arranged according to project requirements.

Industrial machine processing the end of a metal tube
Industrial tube processing line with an operator in a workshop
Digital caliper measuring a round metal component

DIY: Build Your Own Aluminum Pole

For example, an 8-foot aluminum pole made from four sections can be assembled using three swaged extension tubes and one receiving tube. Optional spring buttons and end caps can be added.

Henan Chalco offers custom tube diameters, lengths, hole locations, and surface finishes.

The final assembled length must be confirmed based on the actual insertion depth.

Alt: Illustration of four tube sections assembled into an eight-foot aluminum pole

Related Products

Explore related aluminum tubing products and customization options from Henan Chalco for different structural, material and assembly requirements.

Instant Quote

Frequently Asked Questions About Swaged Aluminum Tubing

Can aluminum tubing be bent and swaged on the same part?

Yes. Bending and swaging can be performed on the same aluminum tube, but the distance between the bend and the swaged end, bend radius, and tooling clearance must be considered.

If the two processing areas are close together, the operation sequence and forming feasibility should be evaluated against the drawing.

Can aluminum tubes with different wall thicknesses be joined by swaging?

Yes, provided the mating dimensions are verified. Even when two tubes have the same nominal outside diameter, different wall thicknesses result in different inside diameters.

The reduced-end outside diameter must be specified based on the receiving tube's actual inside diameter, dimensional tolerances, and required assembly clearance.

Does anodizing or powder coating affect the fit of swaged tube ends?

Yes, they can. Anodizing and powder coating can change the dimensions of mating surfaces, especially where slip-fit clearance is tight. Specify the finish during design and verify the fit in the final surface condition.

Are swaged aluminum tube connections suitable for load-bearing applications?

It depends on the joint design and actual loads. Swaged tubes can be used in structural assemblies, but joint load capacity also depends on the material, wall thickness, insertion depth, and locking method.

Applications involving higher loads, vibration, or repeated assembly and disassembly should undergo appropriate structural verification for the actual service conditions.

Do custom swaged aluminum tubes require new tooling?

Not necessarily. The need for new tooling depends on the starting tube dimensions, degree of reduction, and end configuration.

For nonstandard sizes, existing tooling suitability and any potential tooling charges can be assessed against the drawing.

Request a Quote for Custom Swaged Aluminum Tubing

Henan Chalco supplies custom swaged aluminum tubing based on drawings or samples.

To help confirm processing requirements and provide an accurate quotation, please include the following information where possible:

  • Product Specifications: Drawing or sample, starting tube outside diameter and wall thickness, reduced-end dimensions, tube length, and mating requirements.
  • Material and Processing: Alloy, final delivery temper, hole locations, surface finish, and critical dimensional tolerances.
  • Purchasing Requirements: Order quantity, destination, acceptance standards, and required quality documents.

Send your drawing or sample to request a quote for custom swaged aluminum tubing.

Chalco can provide you the most comprehensive inventory of aluminum products and can also supply you customized products. Precise quotation will be provided within 24 hours.

Get a quote
Do you have the aluminum you need?

Welcome to contact us

  • Alloy, temper, size, and quantity review
  • Drawing, sample, and standard support
  • Available materials and integrated project supply
  • Product demand
  • Name
  • Phone number or WhatsApp
  • Email
  • content

Production MOQ 500 kg. Integrated supply for projects and volume orders.