5754 (EN AW-5754) is a medium-strength aluminum-magnesium alloy with good corrosion resistance, weldability, and formability. It is suitable for industrial component fabrication, commercial vehicles, and tank manufacturing. We supply 5754 aluminum sheet, plate, coil, strip, and tread plate in applicable tempers including O, H111, H22, H24, and H114.
For customer specifications and processing requirements, we support wide sheet and plate, cut-to-size service, coil slitting, bending, punching, and fabrication to drawings. The material temper, dimensional tolerances, applicable standards, and inspection documents can be confirmed according to the product application. We also support samples, volume orders, and export delivery.
Featured 5754 Aluminum Products
The following are our key 5754 aluminum alloy products, covering sheet, medium and thick plate, coil and strip, and tread plate. Different tempers, custom specifications, and processing support are available for customer forming, welding, and volume-manufacturing requirements. Other product forms and special processing requirements can be evaluated for each project (see the processing section below).
-
5754 Aluminum Sheet
For industrial sheet metal and volume component manufacturing, applicable tempers such as O, H111, H22, and H24 are available to balance bending and forming requirements with component strength. Cut-to-size blanking to drawings helps reduce secondary cutting and supports the volume processing requirements of different components.
Multiple temper optionsCut-to-size blankingSuitability for volume processing -
5754 Aluminum Plate
For tanks, containers, and welded structural components, medium and thick plate, wide plate, and custom-cut blanks are available. A suitable plate width can be selected from the developed dimensions of the component to reduce unnecessary joints and welding, with support for subsequent roll forming, welding, and machining.
Wide and thick plate supplyFewer jointsCustom processed blanks -
5754 Aluminum Coil & StripFor continuous forming and high-volume manufacturing, full coils, slit narrow strip, and cut-to-length material are available. Supply can be coordinated to production-line requirements for coil width, inner diameter, dimensional tolerances, and surface protection, reducing upstream material preparation and improving suitability for continuous processing.
Custom coil and strip specificationsSlittingContinuous-production support -
5754 Aluminum Tread PlateFor commercial vehicles, trailers, and industrial anti-slip panels, applicable tempers such as H114 and optional patterns such as five-bar are available. The pattern, base thickness, and plate dimensions can be matched to the actual requirements of floors, steps, and loading areas. Cut-to-size service is also available to reduce processing before installation.
Multiple anti-slip patternsH114 temperCustom sizesCutting
Based on the required product type, material temper, and purchasing quantity, we can help match a suitable 5754 product and supply specification.
5754 Aluminum Specifications & Tempers
We supply 5754 (EN AW-5754 / AlMg3) sheet, plate, coil, strip, and tread plate in different specifications and tempers, with standard sizes and custom production available. The specific supply range is confirmed according to the product type, material temper, and processing requirements.
5754 Aluminum Product Specifications
| Product Type | Thickness (mm) | Width (mm) | Main Tempers |
| Sheet | 0.2–6 | 900–2650 | O, H111, H22, H24 |
| Plate | 6–250 | 900-2650 | O, H111, H112 |
| Coil & Strip | 0.2–8 | 100–2500 | O, H22, H24, H32, H34 |
| Tread Plate | 0.8–8 | 100–1850 | H114 and other applicable tempers |
Note: The ranges above are for reference. Not every thickness, width, and temper can be combined. Narrow coil and strip specifications can be supplied by slitting. For tread plate, the base thickness and total thickness including the pattern should be distinguished. Final specifications are subject to order confirmation.
5754 Aluminum Temper Selection
-
5754 O / H111 Aluminum
Prioritizes forming and bending requirements and is suitable for sheet and plate projects involving roll forming, bending, or subsequent welding. The specific option should be selected according to thickness, bend radius, and component structure.
-
5754 H22 / H24 Aluminum
Work hardening provides higher strength, making these tempers suitable for sheet, plate, and coil products with different strength and formability requirements. H24 typically has higher strength and less forming allowance than H22. Selection should be based on the specific processing requirements.
-
5754 H114 Aluminum
Mainly used for tread plate. The pattern, base thickness, and cut-to-size specifications can be selected according to the requirements of vehicle floors, steps, and industrial anti-slip components.
Applicable standards such as EN 573-3, the EN 485 series, and ASTM B209 can be confirmed according to the product type and order requirements. EN 1386 can be referenced for 5754 tread plate. Dimensional tolerances, surface condition, and material inspection documents are confirmed according to specific purchasing requirements.
5754 Aluminum Technical Data
The principal alloying element in 5754 (EN AW-5754 / AlMg3) is magnesium. Different tempers provide different strength and forming properties. The following data can be used for material selection and purchasing-specification review. Specific properties should be confirmed against the product thickness, applicable standard, and material inspection report.
5754 Aluminum Chemical Composition (EN 573-3)
| Element | Content (wt.%) |
| Mg | 2.6–3.6 |
| Mn | ≤0.50 |
| Cr | ≤0.30 |
| Mn + Cr | 0.10–0.60 |
| Si | ≤0.40 |
| Fe | ≤0.40 |
| Cu | ≤0.10 |
| Zn | ≤0.20 |
| Ti | ≤0.15 |
| Other, each / total | ≤0.05 / ≤0.15 |
| Al | Balance |
5754 Aluminum Mechanical Properties
| Temper | Thickness (mm) | Tensile Strength Rm (MPa) | Yield Strength Rp0.2 (MPa) | Elongation A50 |
| O / H111 | >1.5–3.0 | 190–240 | ≥80 | ≥16% |
| O / H111 | >3.0–6.0 | 190–240 | ≥80 | ≥18% |
| H22 / H32 | >1.5–3.0 | 220–270 | ≥130 | ≥10% |
| H22 / H32 | >3.0–6.0 | 220–270 | ≥130 | ≥11% |
| H24 / H34 | >1.5–3.0 | 240–280 | ≥160 | ≥7% |
| H24 / H34 | >3.0–6.0 | 240–280 | ≥160 | ≥8% |
| Reference: room-temperature mechanical property requirements for the corresponding thickness ranges in EN 485-2. The elongation values shown are minimum A50 values for the listed thicknesses and tempers. Other specifications and tempers such as H112 and H114 should be confirmed according to the applicable standard and product requirements. | ||||
Provide the target properties, applicable standard, and dimensional requirements, and we can assist in confirming the material temper, technical parameters, and supply feasibility.
5754 Aluminum Applications
Industrial Fabrication
Material selection:Temper matched to bending and stamping requirements
Component supply:Shaped cutting, bending, and punched parts
Commercial Vehicle Manufacturing
Vehicle body manufacturing:Wide sheet and plate to reduce welded joints
Component processing:Tread floors, steps, and mounting plates
Tank Manufacturing
Tank forming:Plate width matched to roll-forming and welding requirements
Project support:Custom blanks and pre-processed panels
Marine Fabrication
Corrosion-resistant sheet and plate:Suitable for marine and coastal environments
Project supply:Cut-to-size processing, standards, and inspection support
Based on the specific component application and manufacturing requirements, we can provide a suitable 5754 material option and supporting processing solution.
5754 Aluminum Supply and Fabrication Capabilities
We provide supply services ranging from 5754 sheet, plate, coil, and strip raw materials to custom blanks and semi-finished components. Based on customer drawings, manufacturing processes, and volume-purchasing requirements, we can coordinate material production, precision blanking, forming, and quality inspection, reducing the need to manage multiple suppliers and processing interfaces.
Sheet, Plate and Coil Supply
We supply 5754 standard sheet, wide and thick plate, coil and strip, and tread plate. Material temper, sheet or plate width, thickness, tolerances, and volume-delivery requirements can be matched to each order, providing consistent raw material for subsequent forming, welding, and component fabrication.
Precision Cutting and Blanking
We support cut-to-size sheet and plate, laser cutting, coil slitting, and cut-to-length processing. Shaped blanks, pre-cut panels, and custom strip can be supplied from drawings in formats such as DXF and DWG, reducing customers' upstream blanking operations.
Formed and Machined Components
Based on the component structure and material temper, supporting services such as bending, punching, roll forming, CNC machining, and deburring are available. Deliverables can include mounting plates, brackets, bent panels, and other semi-finished components fabricated to drawings.
Surface Finishing
Optional processes such as brushing, embossing, color coating, protective film application, and surface protection are available according to the product application. The surface-treatment solution is confirmed in view of subsequent welding, assembly, or appearance requirements.
Project Manufacturing Support
We support material selection, drawing evaluation, process coordination, and sample approval. Based on customer requirements for dimensional tolerances, inspection standards, batch consistency, and delivery schedules, we can organize project-based supply of raw materials, processed semi-finished products, and inspection documents.
Submit product drawings and processing requirements, and we can evaluate a processing and delivery solution from raw material through custom blanks and semi-finished components.
5754 Aluminum vs. Other 5xxx Alloys
5754, 5052, 5083, and 5454 are all 5xxx-series aluminum-magnesium alloys, but they differ in strength, forming performance, and suitable service conditions. For industrial fabrication, commercial vehicle, and tank manufacturing projects, the suitable material can be selected based on structural requirements, processing methods, and the service environment.
| Alloy | Main Characteristics | Suitable Purchasing Requirements |
| 5754 aluminum | Medium strength with good formability, weldability, and corrosion resistance | Industrial sheet and plate, commercial vehicle components, general tanks, and welded panels |
| 5052 aluminum | Good formability and corrosion resistance | General sheet metal, boxes, housings, covers, and light-duty components |
| 5083 aluminum | Higher strength and suitable for various high-load welded structures | Marine structural plate and high-strength welded components |
| 5454 aluminum | Suitable for certain elevated-temperature and specific corrosive service conditions | Industrial tanks, chemical containers, and structural components used under specified temperature conditions |
For industrial sheet and plate projects that require a balance of formability, weldability, and corrosion resistance, 5754 is a material worth evaluating. If customers require higher strength, special operating temperatures, or other technical characteristics, we can help evaluate alternatives such as 5052, 5083, and 5454 based on the drawings, material standards, and processing conditions. Corresponding sheet and plate, processed blanks, or custom semi-finished products can also be supplied.
5754 Aluminum FAQs
1. What is the difference between 5754 H111 and H22 aluminum?
H111 is more suitable for projects that prioritize forming operations such as bending and roll forming, while H22 provides higher work-hardened strength. The selection should be based on sheet or plate thickness, bend radius, and component strength requirements.
2. Can 5754 aluminum sheet be bent or welded?
Yes. 5754 offers good suitability for bending and welding, but the specific processing result depends on the material temper, thickness, bend radius, and welding process. For complex components, the processing solution can be evaluated from the drawings.
3. Can I order 5754 H114 tread plate in custom sizes?
Yes. H114 tread plate can be supplied, with patterns such as five-bar, base thickness, and cut-to-size dimensions confirmed according to purchasing requirements. Special specifications and processing requirements require further confirmation.
4. Can 5754 aluminum replace 5052 or 5083?
Substitution can be evaluated for some applications, but the alloys are not directly interchangeable. Material temper, mechanical properties, corrosion-resistance requirements, and applicable standards should be compared, especially for projects involving high-strength structures or specified certifications.
5. Can you provide EN 10204 3.1 certificates for 5754 aluminum?
EN 10204 3.1 material inspection documents can be coordinated according to order requirements, with confirmation of chemical composition, mechanical properties, and heat-lot traceability. Please specify the document requirements and applicable standards when requesting a quotation.
6. What is the minimum order quantity and lead time for 5754 aluminum?
The MOQ and lead time depend on the product type, material temper, specifications, and whether custom processing is required. Inventory can be checked first for standard specifications. Special sizes, tread plate, and processed semi-finished products are confirmed for each order.
Order 5754 Aluminum
We supply 5754 aluminum sheet, plate, coil, strip, and tread plate in standard and custom specifications, with support for cut-to-size blanking, forming, and delivery of semi-finished components. Whether the requirement is a volume purchase of standard material or an industrial project manufactured to drawings, material, processing, inspection, and delivery solutions can be coordinated according to customer requirements.
Please provide the required product type, material temper, dimensions, purchasing quantity, and applicable standard. For custom components, drawings, processing tolerances, and inspection requirements can also be submitted. Based on this information, we will evaluate available specifications, processing feasibility, MOQ, lead time, and pricing.
Chalco can provide you the most comprehensive inventory of aluminum products and can also supply you customized products. Precise quotation will be provided within 24 hours.
Get a quote














