Chalco can produce AMS 4153 UNS A92014 QQA 200/2 2014 aerospace aluminum tubes, has AS9100 Collin Aviation Certification.
Specifications of Chalco 2014 aerospace aluminium pipes & tubes
Alloy: 2014
Material temper: T3, T4, T6, T8, T651, T6511 etc.
Standard: AMS 4153 UNS A92014 QQA 200/2
Outside diameter (OD): from 0.25" to 12"
Wall thickness (WT): from 0.035" to 1.00"
Length: typically 12 feet (or 3.7 meters) or 24 feet (or 7.3 meters)
Other dimensions may vary depending on the needs of the application.
Chemical composition of Chalco 2014A aerospace aluminum alloy
| 2014 alloy chemical components | |
| Chemical Element | % Present |
| Si | 0.15-1.2 |
| Fe | 0.7 |
| Cu | 3.9-5.0 |
| Mn | 0.40-1.2 |
| Mg | 0.20-0.8 |
| Ti | 0.15 |
| Cr | 0.10 |
| Zn | 0.25 |
| Other (Each) | 0.0-0.05 |
| Aluminium (Al) | Balance |
Mechanical properties of Chalco 2014 aerospace pipes & tubes
| Mechanical properties | |
| Mechanical property | Value |
| Tensile strength | 415MPa |
| Yield strength | 370 Min MPa |
| Electrical conductivity | 34%-50% IACS |
Product features of Chalco 2014 aviation aluminum pipes & tubes
2014 Aluminum Alloy is a copper based alloy that exhibits very high strength and excellent machinability in certain tempered conditions. It is not suitable for soldering as it tends to crack. It has poor corrosion resistance, which is why it is often clad with pure aluminum. When exposed and used in environments exposed to the weather, it requires a coat of paint to reduce the risk of corrosion.
- High mechanical strength
- Excellent fatigue resistance
- Excellent machinability
- Protective coating required to avoid corrosion
Application of Chalco 2014A industrial aerospace grade aluminium tube
Hydraulic system: 2014 aluminum tubes for aircraft can be used to manufacture pipelines and connectors in hydraulic systems, such as hydraulic pumps, fuel tanks, aircraft landing gear, rudders, flaps, etc.
Fuel transmission system: 2014 aluminum pipes in aerospace industry can also be used to manufacture pipelines and connectors in fuel transmission systems, such as fuel tanks, fuel pumps, oil pressure regulators, fuel injectors, etc.
Structural parts: 2014 aviation aluminum tubes can also be used to manufacture structural parts of aircraft, such as fuselage shells, fuel tanks, engine intakes, etc.
Cooling system: 2014 aviation aluminum tubes can also be used to make radiators for engine cooling systems and hydraulic systems.
Production process of Chalco aluminum alloy 2014 (UNS A92014) tube
Raw material preparation: select high-purity, low-impurity aluminum alloy materials, conduct chemical composition analysis and mechanical performance tests to ensure that the materials meet the requirements for aviation aluminum tube production.
Material pretreatment: cut the aluminum alloy material into blanks of appropriate size, carry out surface treatment and annealing treatment, eliminate the internal stress of the material, and improve the plasticity and processability of the aluminum alloy material.
Pipe production: using rolling or extrusion process, the aluminum alloy billet is formed into a hollow cylindrical pipe through multi-pass rolling or extrusion.
Pipe surface treatment: pickling, polishing and other surface treatments are carried out on the pipe to remove oxides and impurities on the surface of the pipe and improve the surface quality and corrosion resistance of the pipe.
Pipe processing: according to the needs, the pipes are cut, bent, punched and other processing operations are made into aviation aluminum pipes with specific shapes and sizes.
Inspection and quality control: carry out chemical composition analysis, physical performance test and appearance quality inspection on the produced aviation aluminum tubes to ensure that they meet the requirements of aviation manufacturing.
Stock of Chalco 2014 aerospace grade aluminum pipes & tubes
1/4" (6.35mm) outside diameter, 0.035" (0.889mm) wall thickness aerospace aluminum tubing.
3/8" (9.525mm) outside diameter, 0.049" (1.245mm) wall thickness aerospace aluminum tubing.
1/2" (12.7mm) outside diameter, 0.065" (1.651mm) wall thickness aerospace aluminum tubing.
3/4" (19.05mm) outside diameter, 0.083" (2.108mm) wall thickness aerospace aluminum tubing.
Aviation aluminum tubing with 1 inch (25.4mm) outer diameter and 0.125 inch (3.175mm) wall thickness.
Why choose Chalco aluminium as alloy 2014 aerospace tube aircraft materials manufacturer?
Chalco provides excellent quality aerospace materials, as well as the best technical services in the market, and has a deep knowledge base on how to support customers in meeting future challenges.
We have a complete set of domestic advanced aerospace materials research and development, testing and analysis instruments, which guarantee the efficiency of new product research and development and accelerate the transformation of scientific and technological achievements.
In addition, our R&D & innovation and verification capabilities can help enhance customers' competitiveness by saving time and cost in new product development and marketing.
We have passed the AS9100 certification required by the aviation industry and the Colin Aviation certification, and produce according to the AMS 4153 UNS A92014 QQA 200/2 standard required by customers, providing a strong guarantee for the quality of aerospace materials produced by our company.
The Chalco brand stands for quality, delivery and a solid reputation. With leading technology and globally competitive products, we can continue to develop together with our customers in the future.
