7010 T7451 T7651 Aerospace Aluminum Plate
  1. Home
  2. > Application
  3. > Aluminum Alloys in the Aerospace Industry
  4. > 7010 T7451 T7651 Aerospace Aluminum Plate

7010 T7451 T7651 Aerospace Aluminum Plate

Chalco Aluminum supply 7010 T7541 T7651 Aerospace Standards: QQ-A-250/4, AMS 4035, AMS 4037, AMS 4027, FMS 10101, QQ-A-250/5, AMS 4040, AMS 4041, BMS 7-305.

Certificate of Chalco 7010 T7541 T7651 aerospace aluminum sheet

AS9100

OHSAS 18001

ISO14001

ISO9001

NADCAP HT

NADCAP NDT

IATP16949

aerospace certification

Specification of Chalco 7010 aerospace aluminum plate

Chalco 7010 aerospace aluminum plate specification
Alloy 7010
Temper T7451 T7651 O
Thickness 6.35mm-203mm
Width 500-2650mm
Length 500-12000mm
Standard AMS4083, AMS QQ-A-250/19, ASTM B209/B209M
7010 aluminum plate

Chemical composition of 7010 aerospace aluminum plate

Chemical Alloy 7010
Zn 5.2%-6.2%
Mg 1.4%-2.1%
Cu 0.1%
Mn 0.1%
Cr 0.04%-0.35%
V 0.18%-0.28%
Ti 0.04%-0.08%
Al Remainder

Common alloy tempers and applications of Chalco 7010 aerospace aluminum plate

T7651 temper

This is the temper obtained after heat treatment of 7010 aerospace aluminum plate, which has high strength and toughness, and is widely used in aircraft and spacecraft structural parts, storage tanks and pylons in engines and fuel systems.

T7451 temper

This is the temper obtained after artificial cooling in the 7010 aerospace aluminum plate T7651 temper. It has high strength and good machinability. It is widely used in aircraft structural parts, storage tanks and pylons in fuel systems. And some spacecraft structural parts, etc.

O temper

This is the annealed temper of 7010 aerospace aluminum sheet, that is, the temper without heat treatment, which has high plasticity and machinability, and is often used to manufacture some simple aerospace components, such as thin-walled tubes, bent tubes, etc.

In addition to the common alloy tempers mentioned above, 7010 aerospace aluminum sheet can also be made into other tempers, such as T6, T7, etc., to meet different application requirements. Each alloy temper has its specific performance and application range, and the specific selection needs to be determined according to the specific application requirements.

application of 7010 aerospace aluminum plate

Properties of Chalco 7010 aerospace aluminum sheet

Chalco Aluminum 7010 aerospace aluminum sheet is a high-strength, high-toughness aluminum alloy material whose composition mainly includes aluminum, zinc and magnesium. It is widely used in aerospace because of its excellent properties, including:

High strength

7010 aerospace aluminum sheet has excellent strength, which is higher than many other aluminum alloy materials, so it is widely used in the manufacture of high-strength aerospace components.

Good toughness

7010 aerospace aluminum sheet is also very tough and can withstand very high loads and impact loads, so it is very suitable for applications that need to withstand harsh conditions.

Good corrosion resistance

7010 aerospace aluminum sheet also has good corrosion resistance and can be used in harsh environments, such as marine environment, high temperature environment and high humidity environment.

Excellent fatigue performance

The fatigue performance of 7010 aerospace aluminum plate is also very good, it can withstand repeated stress and strain, and maintain the strength and performance of the material for a long time.

Easy processing

7010 aerospace aluminum sheet can be cut, formed and welded by conventional processing technology, and heat treatment technology can also be used to further improve its strength and mechanical properties.

properties of 7010 aerospace aluminum plate

Instructions for using Chalco 7010 aerospace aluminum plate

Proper storage

Before use, it must be ensured that the 7010 aluminum plate is in a dry and clean environment. Avoid long-term exposure of aluminum plates to harmful substances such as moisture, corrosive gases, dust, and pollutants.

Appropriate processing technology

7010 aluminum plate can adopt conventional processing technology, such as cutting, forming and welding. However, due to its high strength and high toughness, higher-level processing equipment and tools may be required.

Proper heat treatment

7010 aluminum sheet can further improve its strength and mechanical properties through heat treatment. When performing heat treatments, proper temperature and time requirements must be followed to avoid negative effects on the material.

Avoid excessive loading

Although 7010 aluminum plate has high strength and high toughness, it still needs to be careful not to use it under overload or high stress, which may cause damage or damage to the material.

To sum up, for the use of 7010 aerospace aluminum sheet, it is necessary to ensure that proper requirements and guidance are followed during its storage, processing, heat treatment and use to ensure its performance and service life.

Instructions for using Chalco 7010 aerospace aluminum plate

Do you have the aluminum you need?

Welcome to contact us

  • Contact us to get quotation information
  • Contact us for the details of the product
  • Contact us to get free samples
  • Product demand
  • Name
  • Phone number or WhatsApp
  • Email
  • content